SCT7650EX Datasheet, PDF (2/2 Pages) 3M Electronics – Rugged Solution for Impact Strength and User Safety

3M^™ MicroTouch^™ System SCT7650EX Specifications
System Performance
Light Transmission
Input Method
Accuracy
Resolution
Linearization
Tail Connection
86.5% (±2%)
Finger input
>99% of true position
16k x 16k (maximum resolution)
Factory linearized
Solder-less design
Electronics (3M MicroTouch Controller EX)
Communication
Dimensions
Operating Current
Sleep Current
Power Connection
Connectors
ESD
Point Speed (PPS)
Minimum Touch Time
MTBF
USB and Serial
1.3" (33.02 mm) x 2.4" (60.96 mm) REF
75 mA (typical)
< 500 uA
USB BUS (5V) or 5V/12V Serial
5-pin AMP (Touch side)
5-pin or 7-pin Molex (COM side)
±8KV Contact, ±30KV Air
200 pps (typical)
< 5.4 ms
>700,000 hours
Reliability
Surface Obstructions
Chemical Resistance
Impact Resistance
Liquid Resistance
Operating Temperature
Storage Temperature
Humidity
Withstands most surface contaminants
ASTM-D-1308-02 and ASTM-F-1598-95
Steel ball drop test UL 60950
Liquids on screen do not impede touch
performance
-40º C to 70º C
-50º C to 85º C
Up to 90% RH from 0º C to 35º C,
non-condensing
Mechanical
Glass Thickness
Display Size Supported
Surface Scratch Hardness
Scratch Resistance
Sealing
Gasketing
Cleaning
RoHS Directive compliant
0.298" (7.57 mm)
10.4" (264.16 mm) to 19" (482.60 mm)
(standard and wide formats)
MoHS 7 or higher to induce a
functional failure
Proprietary top coat
NEMA 4X / IP66
Complete water-resistant seal compatible
Water, isopropyl alcohol, or similar
non-abrasive cleaners
Yes
System Warranty
5 years of unlimited surface touches
Standard Part Numbers
Display Size
10.4"
12.1"
15.1"
17"
19"
USB Part Number
98-0003-3134-2
98-0003-3140-9
98-0003-3173-0
98-0003-3179-7
98-0003-3185-4
Serial Part Number
98-0003-3133-4
98-0003-3139-1
98-0003-3172-2
98-0003-3178-9
98-0003-3184-7
Part Numbers with 3M^™ Vikuiti^™ ALCF (privacy film)
Display Size
10.4"
12.1"
15.1"
17"
USB Part Number
98-0003-3137-5
98-0003-3170-6
98-0003-3176-3
98-0003-3182-1
Serial Part Number
98-0003-3136-7
98-0003-3142-5
98-0003-3175-5
98-0003-3181-3
3M Touch Systems
Subsidiary of 3M Company
501 Griffin Brook Park Drive
Methuen, MA 01844
U.S.A.
1-888-659-1080
www.3M.com/touch
RoHS Directive compliant: In accordance with European Directive 2002/95/EC, “RoHS Directive compliant” means that the product or part does not contain any of the following
substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by
weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s knowledge and belief based on information provided by third party suppliers to 3M. (9/06)
IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems’ Products and software are warranted to meet their pub-
lished specifications from the date of shipment and for the period stated in the specification. 3M Touch Systems makes no additional warranties, express or implied, includ-
ing but not limited to any implied warranties of merchantability or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems Products
and software are fit for User’s particular purpose and suitable for its method of production, including intellectual property liability for User’s application. If the Product, software
or software media is proven not to have met 3M Touch Systems’ warranty, then 3M Touch Systems’ sole obligation and User’s and Purchaser’s exclusive remedy, will be, at 3M
Touch Systems’ option, to repair or replace that Product quantity or software mediator to refund its purchase price. 3M Touch Systems has no obligation under 3M Touch Sys-
tems’ warranty for any Product, software or software media that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing operations or
assemblies by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products or software for any loss or
damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theory asserted. (7/02)
3M, MicroTouch, and ClearTek are trademarks of 3M Company.
Printed in USA © 3M 2009
SCT7650EX -0209