SCT3250EX Datasheet, PDF (2/2 Pages) 3M Electronics – The Clear Solution for Demanding Touch Applications

3M^™ MicroTouch^™ SCT3250EX System Specifications
System Performance
Light Transmission
Input Method
Accuracy
Resolution
Linearization
Tail Connection
91.5% (±1.5%)
Finger contact
>99% of true position
1024 x 1024, but capable of 16K x16K
when used with EX controllers
Factory linearized
Solder-less design
Electronics (3M MicroTouch Controller EX)
Communication
Dimensions
Operating Current
Sleep Current
Power Connection
Connectors
ESD
Point Speed (PPS)
Minimum Touch Time
MTBF
USB, Serial, USB HID Digitizer,
Dual Mode (USB and Serial
1.30" x 2.55" x 0.45"
33.0 x 65.0 x 11.4 mm
USB: 75 mA (typical)
Serial: 85 mA (typical)
< 500 uA
USB: 5Vdc ± 5% 75 mA
Serial: 5-12Vdc ± 5% 85 mA
5-pin locking AMP (Touch side)
5-pin Molex (COM side)
±8KV Contact, ±27KV Air
200 pps
5.4 ms
>700,000 hours
Reliability
Surface Obstructions
Chemical Resistance
Liquid Resistance
Operating Temperature
Storage Temperature
Humidity
Withstands most surface contaminants
ASTM-D-1308-02 and ASTM-F-1598-95
Liquids on screen do not impede touch
performance
-40° C to 70° C for the touch screen
-50°C and 85°C
Up to 90% RH from 0º C to 35º C, non-condensing
Mechanical
Glass Thickness
Display Size
Surface Scratch
Scratch Resistance
Sealing
Cleaning
RoHS Directive
Compliant
0.125" (3.18 mm)
Supported 5.7" (144.78 mm) to 32" (812.80 mm)
(standard and wide formats)
Hardness MoHS 7 or higher to induce a
functional failure
3M^™ ClearTek^™ hard coat
NEMA 4X / IP66, complete water-resistant seal compatible
Water, isopropyl alcohol, or similar non-abrasive cleaners
Yes
System Warranty
5 years on touch system
Unlimited touch warranty
Operating Systems Supported
Windows 7 (32-and 64-bit)*
Windows Vista (32-and 64-bit)
Windows XP (32-and 64-bit)
Windows 2000, Server 2003, Server 2008 (32-and 64-bit)
Windows 98, 95, ME, NT 4.0, NT 3.5, 3.1x (32-bit)
Windows CE, XPe, WePOS (32-bit)
Linux Kernel 2.6, Kernel 2.4 (serial only)**
Apple OSX (UPDD driver)**
* 3M MicroTouch System SCT3250EX HID is Windows 7 Logo Compatible
** Limited MT7 features supported
3M Touch Systems
Subsidiary of 3M Company
501 Griffin Brook Park Drive
Methuen, MA 01844
U.S.A.
1-888-659-1080
www.3M.com/touch
RoHS Directive compliant: In accordance with European Directive 2002/95/EC, “RoHS Directive compliant” means that the product or part does not contain any of the following substances in excess
of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s knowledge and
belief based on information provided by third party suppliers to 3M. (9/06)
IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems’ Products and software are warranted to meet their published specifications
from the date of shipment and for the period stated in the specification. 3M Touch Systems makes no additional warranties, express or implied, including but not limited to any implied warranties of
merchantability or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems Products and software are fit for User’s particular purpose and suitable for its
method of production, including intellectual property liability for User’s application. If the Product, software or software media is proven not to have met 3M Touch Systems’ warranty, then 3M Touch
Systems’ sole obligation and User’s and Purchaser’s exclusive remedy, will be, at 3M Touch Systems’ option, to repair or replace that Product quantity or software mediator to refund its purchase
price. 3M Touch Systems has no obligation under 3M Touch Systems’ warranty for any Product, software or software media that has been modified or damaged through misuse, accident, neglect,
or subsequent manufacturing operations or assemblies by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products or
software for any loss or damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theory asserted. (7/02)
3M, MicroTouch, and ClearTek are trademarks of 3M Company.
Printed in USA © 3M 2012 All rights reserved.
SCT3250EX -0212