N2534-5002RB Datasheet, PDF (2/6 Pages) 3M Electronics – .100 x .100 Low Profile, SMT Straight, Straight and Rt Angle Through-Hole

3M^™ Four-Wall Header
.100” x .100” Low Profile, Straight Through-Hole
2500 Series
Inch
(mm)
Tolerance Unless Noted
.0 .00 .000
± ± .01 ± .005
[ ] Dimensions for
Reference only
C
Table 1
Pin Qty
Dimensions
A
B
6
0.588 (14.94) 0.508 (12.90)
8
0.688 (17.48) 0.608 (15.44)
10
0.788 (20.02) 0.708 (17.98)
14
0.988 (25.10) 0.908 (23.06)
16
1.088 (27.64) 1.008 (25.60)
20
1.288 (32.72) 1.208 (30.68)
24
1.488 (37.80) 1.408 (35.76)
26
1.588 (40.34) 1.508 (38.30)
30
1.788 (45.42) 1.708 (43.38)
34
1.988 (50.50) 1.908 (48.46)
36
2.088 (53.04) 2.008 (51.00)
40
2.288 (58.12) 2.208 (56.08)
50
2.788 (70.82) 2.708 (68.78)
60
3.288 (83.52) 3.208 (81.48)
64
3.488
Notes:
1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518).
2. Contact tails .0245 [0.622] wire with .0075 [0.191] corner radii & .028 [.072] diagonal.
3. Solder stand offs facilitate .01 clearance above board for reflow soldering.
(88.60)
3.408 (86.56)
Polarizing
Notches
B
B
BC
BCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
Ordering Information
Prefix:
N = High Temp. Black (PCT)
(RB, UB, or UG Pltg. Req’d)
Blank = Std. Temp. Gray (PBT)
(UB or UG Pltg. Req’d)
Pin Quantity:
(See Table 1)
X25XX - 60XX - XX
Solder Tail
02 = for .062 [1.57] thick board (Standard)
03 = for .094 to .125 [2.39 to 3.18] thick board
Plating:
RB = 30µ” [0.76µm] Gold with 200µ” [5.08 µm]
Matte Tin Solder Tails (RIA E1 & C1 apply)
UG = 15µ” [0.38µm] Gold with 200µ” [5.08µm] 60:40
Tin-Lead Solder Tails (RIA E3 & C2 apply)
UB = 30µ” [0.76µm] Gold with 200µ” [5.05µm] 60:40
Tin-Lead Solder Tails (RIA E3 & C2 apply)
TS-0770-L
Sheet 2 of 5
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373