N2510-5002-RB Datasheet, PDF (2/5 Pages) 3M Electronics – 4-Wall Header

3M™ 4-Wall Header
.100″ × .100″ Low Profile, Straight and Right Angle
2500 Series
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch _{± .1} ± .01 ± .005
[ ] Dimensions for
Reference only
.112 +/- .01 [2.84] for 02 & K2 versions
.155 +/-.01 [3.94] for 03 version
Table 1
Pin
Dimensions
Polarizing
Qty
A
B
Notches
10 .788 [20.02] .708 [17.98]
BC
14 .988 [25.10] .908 [22.06] B C D E
16 1.088 [27.64] 1.008 [25.60] A B C D E
20 1.288 [32.72] 1.208 [30.68] A B C D E
24 1.488 [37.80] 1.408 [35.76] A B C D E
26 1.588 [40.34] 1.508 [38.30] A B C D E
30 1.788 [45.42] 1.708 [43.38] A B C D E
34 1.988 [50.50] 1.908 [48.46] A B C D E
40 2.288 [58.12] 2.208 [56.08] A B C D E
50 2.788 [70.82] 2.708 [68.78] A B C D E
60 3.288 [83.52] 3.208 [81.48] A B C D E
64 3.488 [88.60] 3.408 [86.56] A B C D E
Notes:
1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518).
2. Contact tails .0245 [0.622] crowned wire with .0075 [0.191] corner radii & .028 [.072] diagonal.
3. See page 4 for kink tail positions.
4. Solder stand offs facilitate .01 clearance above board for reflow soldering.
Ordering Information
N25XX-60XX-RB
Pin Quantity:
(See Table 1)
Tail
02 = for .062 [1.57] thick board
03 = for .094 to .125 [2.39 to 3.18] thick board
K2 = kinked for .062 [1.57] thick board
TS-0770-15
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373