5413-2 Datasheet, PDF (2/2 Pages) 3M Electronics – A tape consisting of a Kapton® polyimide film and silicone adhesive designed for high temperature applications.

Polyimide Film Tape
5413
Application Ideas
• Mask for protection of gold fingers of printed circuit boards during wave solder or
solder dip process.
• Release surface in fabrication of parts cured at elevated temperatures
Features
• Thin Kapton^® polyimide
film
• Silicone adhesive
• High adhesive to film
bond
Advantages
• Dimensionally stable at
high temperatures
• Flame retardant, chemical
and radiation resistant
• High temperature
performance reduces
adhesive transfer
• Reduces adhesive transfer
Benefits
• No rework - high
productivity
• Protects surfaces, helping
reduce replacement costs
• No cleaning required -
helps increase productivity
• No cleaning required -
helps increase productivity
For Additional
Information
To request additional product information or to arrange for sales assistance, call toll free 1-800-227-5085.
Address correspondence to: 3M Industrial Tape and Specialties Division, 3M Center, Building 220-8E-04,
St. Paul, MN 55144-1000. Our fax number is 612-733-9175. In Canada, phone: [phone].
In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
Important Notice
3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is
responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s
method of application. Please remember that many factors can affect the use and performance of a 3M
ITSD product in a particular application. The materials to be bonded with the product, the surface
preparation of those materials, the product selected for use, the conditions in which the product is used,
and the time and environmental conditions in which the product is expected to perform are among the
many factors that can affect the use and performance of a 3M ITSD product. Given the variety of factors
that can affect the use and performance of a 3M ITSD product, some of which are uniquely within the
user’s knowledge and control, it is essential that the user evaluate the 3M ITSD product to determine
whether it is fit for a particular purpose and suitable for the user’s method of application.
Limitation of Remedies
and Liability
If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE
TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M
PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special,
incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or
strict liability.
ISO 9002
This Industrial Tape and Specialties Division product was manufactured under a 3M quality system
registered to ISO 9002 standards.
3
Industrial Tape and Specialties Division
3M Center, Building 220-7E-01
St. Paul, MN 55144-1000
Recycled Paper
40% pre-consumer
10% post-consumer
Kapton is a registered trademark of
E.I. DuPont de Nemours Co.
Printed in U.S.A.
©3M 1994 70-0703-2532-2