SDR-7 Datasheet, PDF (1/2 Pages) 3M Electronics – STD Tape Dispenser SDR Wire Marking Tape

ScotchCode^™
STD Tape Dispenser
SDR Wire Marking Tape
Data Sheet
Application:
ScotchCode^TM SDR is a polyester film tape with an acrylic
pressure sensitive adhesive, the tape is used in the 3M
STD ScotchCode tape dispenser. From the dispenser, the
user can pull out and tear off the amount of tape needed for
thier particular application such as marking wires, terminal
blocks, panels, ect.
Tape Technical Data:
(All Values are Typical Values)
Material:
Polyester film with acrylic
pressure sensitive adhesive
Application Temperature
Range
32°F to 120°F
(0°C to 49°C)
Operating Temperature
Range
–40°F to 250°F
(–40°C to 121°C)
Storage Temperature
(Relative Humidity)
80°F (26°C)
25–50%
Tape Roll Width
0.215 inches
(5,46 mm)
Tape Roll Length
96 inches
(2,43 m)
Number of Characters
6 per inch
(6 per 2,54 cm)
Tape Thickness
3 mils (0,08mm)
Adhesion to Steel
( ASTM D–1000)
25 oz./inch width
(273 Newtons/Meters)
Adhesion to Backing
( ASTM D–1000)
10 oz./inch width
(109 Newtons/Meters)
Engineering Specification:
Wire marking tape shall be polyester tape, 3 mils
(0,08mm) thick, with acrylic pressure sensitive adhesive.
The tape will be in a roll 0.215 inches (5,46mm) wide and
96 inches (2,43m) long, wound on a .38 inch (9,65mm)
dia. plastic core. There will be six ( 6 ) characters per inch
of tape. These rolls will be used with 3M ScotchCode STD
tape dispensers and shall be manufactured by 3M.
PRODUCT DESCRIPTION
SDR–0
SDR–1
thru
SDR–9
ScotchCode
Wire Marking Tape
PRINTING
ON ROLL
0
1
thru
9
SDR–0–9
SDR–10–19
thru
SDR–90–99
0–9 consecutive
10–19 consecutive
90–99 consecutive
1 number/roll
1 number/roll
thru
1 number/roll
SDR–A
A
thru
thru
SDR–Z
Z
SDR–L1
L1
SDR–L2
L2
SDR–L3
L3
SDR–T1
T1
SDR–T2
T2
SDR–T3
T3
SDR + (Plus)
+
SDR – (Minus)
–
This tape is also avaibile in ten colors.
Color of Roll
SDR–BK
BLACK
SDR–BL
BLUE
SDR–BN
BROWN
SDR–GN
GREEN
SDR–GY
GRAY
SDR–OR
ORANGE
SDR–RD
RED
SDR–VL
VIOLET
SDR–WH
WHITE
SDR–YL
YELLOW
SDR–MC
*
* Includes one roll of each of the above colors.
STD–0–9 dispenser filled with numbers 0 thru 9
STD–C dispenser filled with all ten colors
STD
empty dispenser