N7E50-Q516RA-50-WF Datasheet, PDF (1/6 Pages) 3M Electronics – Headers mate with both CompactFlash™ Type I and Type II cards

3M™ CF Card Header
CompactFlash™ Type II, Surface Mount
7E50 Series
• Headers mate with both CompactFlash™ Type I and
Type II cards
• Polarization options for top or bottom boardmount
• Extended guide rails enable accurate and easy card
insertion
• Single row surface mount solder tails facilitate auto
placement and IR soldering
• Optional 2 mm board standoff enables board
population
• Meets CFA standards for known compatibility and
reliability
• See regulatory information appendix (RIA) for
chemical compliance information
Date Modified: November 5, 2007
Physical
Insulation
Material: High Temperature Thermoplastic
Flammability: UL 94V-0
Color: Beige
Contact
Material: Copper Alloy
Plating
Underplating: 2.03 μm [ 80 μ″] Nickel
Wiping Area: 0.38 μm [ 15 μ″ ] or 0.76 μm [ 30 μ″ ] Gold
Solder Tails: 3.81μm [150μ″] Matte Tin or Gold Flash
Marking 3M Logo
Electrical
Current Rating: 0.5 A
Insulation Resistance: 10³ MΩ at 500 V_DC
Withstanding Voltage: 500 V_AC for 1 minute
Environmental
Temperature Rating: -40°C to +85°C
Process Rating: Maximum 260 C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
TS-2082-C
Sheet 1 of 3
3
Interconnect Solutions
http://www.3M.com/interconnects/
CompactFlash is a registered trademark of Sandisk Corporation.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373