|
N7E50-M516RB-40-WF Datasheet, PDF (1/6 Pages) 3M Electronics – 3M™ CF Card Header CompactFlash™ Type II, Long Guides, Surface Mount | |||
|
3M⢠CF Card Header
CompactFlash⢠Type II, Long Guides, Surface Mount
7E50 Series
⢠Headers mate with both CompactFlash⢠Type I and Type II
cards
⢠Polarization options for top or bottom boardmount
⢠Extended guide rails enable accurate and easy card insertion
⢠Single row surface mount solder tails facilitate auto
placement and IR soldering
⢠Optional 2 mm board standoff enables board population
⢠Meets CFA standards for known compatibility and reliability
⢠Metal brace provides stability for ejector attachment
⢠Multiple styles of ejector available
⢠Optional ejector can be purchased pre-assembled or
separately
⢠Optional Tape and Reel or Tray packaging for automated
assembly
⢠See the Regulatory Information Appendix (RIA) in the
âRoHS complianceâ section of www.3Mconnector.com for
compliance information (RIA E1 & C1 apply)
Date Modified: August 16, 2010
TS-2083-G
Sheet 1 of 5
Physical
Insulation:
Material: High Temperature Thermoplastic
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 2.03 μm [ 80 μâ ] Nickel
Wiping Area: 0.38 μm [ 15 μâ ] or 0.76 μm [ 30 μâ ] Gold
Solder Tails: 3.81μm [ 150 μâ ] Matte Tin or Gold Flash
Marking: 3M Logo
Electrical
Current Rating: 0.5 A
Insulation Resistance: 103Ω at 500 VDC
Withstanding Voltage: 500 VAC for 1 minute
Environmental
Temperature Rating: -40°C to +85°C
Process Rating: Maximum 260 C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
CompactFlash is a registered trademark of Sandisk Corporation.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
|
▷ |