|
N7E50-7516PK-20 Datasheet, PDF (1/6 Pages) 3M Electronics – Single row solder tails with 0.635 mm spacing | |||
|
3M⢠CF Card Header
CompactFlash⢠Type I, Surface Mount
7E50 Series
⢠Meets CFA standards
⢠Single row solder tails with 0.635 mm spacing
⢠Board component clearance with 1.64 mm
standoff
⢠Ejector option for easy removal of CF Card
⢠Retainer clip option permits stability for mobile
and high vibration applications
⢠See regulatory information appendix (RIA) for
chemical compliance information
Date Modified: September 13, 2007
TS-0662-C
Sheet 1 of 4
Physical
Insulation
Material: Liquid Crystal Polyester (LCP)
Flammability: UL 94V-0
Color: Beige
Contact
Material: Copper Alloy
Plating
Underplating: 100 μⳠ[ 2.54 μm ] Nickel
Wiping Area: Gold flash over 80/20 Palladium Nickel, Lubricated (see Ordering Information)
Solder Tails: Gold flash (see Ordering Information)
Marking 3M Logo, Part Number on Ejector Only
Electrical
Current Rating: .5 A
Insulation Resistance: >1 à 109 Ω at 500 VDC, >1 à 108 Ω at 500 VDC after Environmental
Conditioning
Withstanding Voltage: 500 VRMS at Sea Level
Environmental
Temperature Rating: -55°C to +85°C
Process Rating: Maximum 260°C (per J-STD-020C)
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
CompactFlash is a registered trademark of SanDisk Corporation.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
|
▷ |