M9H Datasheet, PDF (1/3 Pages) Tyco Electronics – Double-Balanced Mixer

M9H / M9HC
Double-Balanced Mixer
Features
• LO 10 TO 1600 MHz
• RF 10 TO 1500 MHz
• IF 0 TO 600 MHz
• LO DRIVE: +20 dBm (NOMINAL)
• HIGH INTERCEPT POINT: +30 dBm TYP. (UPCONV.)
+24 dBm TYP. (DOWNCONV.)
Product Image
Description
The M9H is a double balanced mixer, designed for use in military,
commercial, and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband ferrite baluns to attain
excellent performance. This mixer can also be used as a phase
detector and/or bi-phase modulator since the IF port is DC coupled to the
diodes. Environmental screening is available to MIL-STD-883,
MIL-STD-202, or MIL-DTL-28837, consult factory.
Rev. V3
Ordering Information
Part Number
M9H
M9HC
Package
TO-8
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo = +20 dBm (Downconverter Application only)
Parameter
Test Conditions
Typical
Units
25ºC
Guaranteed
0º to 50ºC -54º to +85ºC
fR=0.02 to 0.4 GHz, fL=0.01 to 0.6 GHz, fI=0.002 to 0.2GHz dB
7.0
8.0
8.3
SSB Conversion Loss & fR=0.01 to 1.5 GHz, fL=0.01 to 1.6 GHz, fI=0.001 to 0.6GHz dB
8.0
9.0
9.3
SSB Noise Figure (max)
fI=0.002 to 0.2 GHz dB
8.5
9.0
9.3
fI=0.001 to 0.6 GHz dB
9.0
9.5
9.8
Isolation, L to R (min)
Isolation, L to I (min)
Isolation, R to I (min)
fL = 0.01 to 0.4 GHz
fL = 0.4 to 1 GHz
fL = 1 to 1.5 GHz
fL = 0.01 to 0.4 GHz
fL = 0.4 to 1 GHz
fL = 1 to 1.5 GHz
fL = 0.01 to 1 GHz
fL = 1 to 1.5 GHz
dB
35
28
27
dB
30
23
22
dB
22
20
19
dB
40
28
27
dB
22
16
15
dB
18
13
12
dB
20
dB
10
1 dB Conversion
Compression
fL @ +20 dBm
dBm
+15
Input IP3
dBm
+30
dBm
+24
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.