FMV02 Datasheet, PDF (1/4 Pages) 3M Electronics – 3M™ Void Polyester Label Products

3
Void Polyester Label Products
FMV02 • FMV12 • FMV22 • FMV32 • FMV0E
Technical Data
February, 2007
Product Description
3M™ Void Polyester Label Products are tamper-indicating stocks designed to provide
a “void” message in the facestock when removal is attempted. These void polyester
labels utilize 3M™ Adhesive P1410 which is an aggressive tackified emulsion acrylic
adhesive that offers excellent adhesion to a wide variety of substrates, including
polyolefins.
Construction
Product
Facestock
3M™ Void
Polyester Label
Product FMV02
.002 in. Silver Void
Polyester TC
3M™ Void
Polyester Label
Product FMV12
.002 in. White Void
Polyester EDP
3M™ Void
Polyester Label
Product FMV22
.002 in. White Void
Polyester TC
3M™ Void
Polyester Label
Product FMV32
.002 in. Silver Void
Polyester Translucent
EDP
3M™ Void
Polyester Label
Product FMV0E
.002 in. Silver Void
Polyester TC
(Calipers are nominal values)
Adhesive
P1410
Perm. 18
P1410
Perm. 18
P1410
Perm. 18
P1410
Perm. 18
P1410
Perm. 18
Liner
50# SC
3.1 mil semi-bleached
super calendered kraft sheet
50# SC Remoist
3.1 mil semi-bleached
super calendered kraft sheet
50# SC
3.1 mil semi-bleached
super calendered kraft sheet
50# SC Remoist
3.1 mil semi-bleached
super calendered kraft sheet
50# SC C2S
3.1 mil semi-bleached
super calendered kraft sheet
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
Adhesion properties determined per TLMI Method using 1.0 mil polyester with 0.9 mils
of adhesive on a stainless steel panel.
Peel Adhesion
Loop Tack
Shear
Adhesive Coat Weight
Liner Release
Application Temperature
Service Temperature
Conformability
3.0 lbs./in. (528 N/m) TLMI Method, 180° Peel, 12"/min., 1" wide sample
1.8 lbs./in. (316 N/m)
TLMI Method, 12"/min., 1" wide sample
1.0 hour
TLMI Method, 0.25 in.² x 500g
1.75 g/100 in.² ± 10%
3M Method E10MFP01
15 to 50 g/2 in.
TLMI Method, 180° removal, 300 in./min.
40°F to 120°F (5°C to 49°C)
-20°F to 240°F (-29°C to 115°C)
Semi-rigid – Label is suitable for flat or slightly curved surfaces.