D2746 Datasheet, PDF (1/2 Pages) 3M Electronics – How To Specify a 3M™ Static Shielding or Moist ure Barrier Bag

How To Specify a 3M^™ Static Shielding
or Moisture Barrier Bag
Page 1
To specify a bag, you need to choose:
Bag Type
Bag Size
Markings
Bag Features
Call your Distributor or 3M Customer Care Representative for
Assistance with Specifying a Bag, or for Stock Levels and Lead Times.
bag type
Bag types are based on the intended function of the bag and the material the bag is made from.
Choose the bag for your application:
Bag
Name
Static Shielding Bag, Metal-in
3M 1000
Static Shielding Bag, Metal-in ZipTop
3M 1000 ZipTop
Static Shielding Bag, Metal-out
3M 1500
Static Shielding Bag, Metal-out ZipTop
3M 1500 ZipTop
Moisture Barrier Bag, Aluminized, 3.6 mil
Dri-Shield 2000
Moisture Barrier Bag, Aluminized, 3.6 mil, Metal-out Dri-Shield 2500
Moisture Barrier Bag, Aluminized, 7.0 mil
Dri-Shield 2700
Moisture Barrier Bag, Foil, 6 mil
Dri-Shield 3000
Moisture Barrier Bag, Foil, 4 mil
Dri-Shield 3400
bag size
Determining Size:
Calculate the approximate size using the instructions below.
Select the nearest standard sized bag from the lists on the data sheets.
Request a sample of the bag.
Test the fit the item in the bag.
Open Top
length
Shielding Bag Size Approximation:
Bag Width
=
Item Height + Item Width + 1 inch
Bag Length
=
Item Height + Item Length + 1.5 inches
Barrier Bag Size Approximation:
Bag Width
=
Item Height + Item Width + 1 inch
Bag Length
=
Item Height + Item Length + 2.5 inches
The length of barrier bags may be extended further to allow for multiple
vacuum sealing cycles.
Measuring a Bag
Width is measured from inside seam to inside seam.
Length is measured from the top edge to the bottom fold.
Opening is in the “width” dimension.
ZipTop
1”
length
opening
seal
fold
width
seam
width
opening
ZipTop
seal
width
fold
seam
width