9882 Datasheet, PDF (1/5 Pages) 3M Electronics – 3M™ Thermally Conductive Adhesive Transfer Tapes

Technical Data
September, 2010
3M^™ Thermally Conductive Adhesive Transfer Tapes
9882 ^• 9885 ^• 9890
Product Description
3M™ Thermally Conductive Adhesive Transfer Tapes 9882, 9885, and 9890 are designed to provide a preferential heat-
transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or
heat pipes).
• These tapes are pressure sensitive adhesives loaded with thermally conductive ceramic fillers. Pressure is needed to form
a bond. Heat and pressure may be needed on some substrates to achieve an acceptable bond.
• The specialized acrylic chemistry of these tapes provide for good thermal stability of the base polymer.
• The thermally conductive tapes are on a silicone treated polyester release liner for ease of handling and die cutting.
• The tapes offer both good thermal conductivity and good electrical insulation properties.
• Tapes 9882, 9885, and 9890 provide best adhesion results when used with high surface energy substrates. If using low
surface energy material, 3M™ Thermally Conductive Adhesive Transfer Tapes 8805, 8810, 8815, or 8820 could provide
a higher adhesion bond and improved wet-out of the surface..
Product Construction
Product Number
Color
Tape Type
Tape Thickness
Filler Type
Liner Type
Liner Thickness
3M™ Thermally Conductive Adhesive Transfer Tapes
9882
9885
9890
Grey
Filled Acrylic Polymer
2 mils (0.05 mm)
5 mils (0.13 mm)
10 mils (0.25 mm)
Ceramic
Single Liner using Silicone-Treated Polyester
2 mil (50 µm)
3