926781-01-10-I Datasheet, PDF (1/5 Pages) 3M Electronics – 3M™ D Ribbon Wiremount Plug

3M™ D Ribbon Wiremount Plug
Molded Shell
3000 Series
• Accepts 26-28 AWG wire
• Accepts .050 inch round, flat or jacketed cable
• Low profile
• Flexible design offers various mounting
applications
• Contact design efficiency enables
multiple insertion/withdrawals
• Optional bail mount kit available
• RoHS* compliant
Date Modified: January 9, 2007
TS-0819-08
Sheet 1 of 3
Physical
Insulation
Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0
Color: Gray
Contact
Material: Copper Alloy
Plating:
Underplating: 100 μ″ [ 2.54 μm ] Nickel
Wiping Area: 30 μ″ [ 0.76 μm ] Gold
Strain Relief
Material: Stainless Steel - 0.012 [ 0.30 ] Thick
Wire Accommodation: 26 and 28 AWG Solid or Stranded
Marking: 3M Logo, Part Number Identification, Position 1
Electrical
Current Rating: 1 A
Insulation Resistance: _{> 1 × 10}⁹_{Ω at 500 VDC}
Withstanding Voltage: 1000 Vrms at Sea Level
Environmental
Temperature Rating: -55°C to +105°C
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373