|
7G24 Datasheet, PDF (1/5 Pages) 3M Electronics – 3M™ Connector for CFast™ Card | |||
|
3M⢠Connector
for CFast⢠Card
7G24 Series
⢠Headers mate with both CFast⢠Type I and Type II
cards
⢠Extended guide rails enable accurate and easy card
insertion
⢠Single row surface mount solder tails facilitate auto
placement and IR soldering
⢠Optional 2 mm board standoff enables board
population
⢠Meets CFA standards for known compatibility and
reliability
⢠Optional ejector and card retainer can be purchased
pre-assembled or separately
⢠Integral side solder tab with card grounding feature
and also prevent the card from âflyingâ out of header
during ejection
⢠See the Regulatory Information Appendix (RIA) in
the âRoHS complianceâ section of
www.3Mconnector.com for compliance
information (RIA E1 & C1 apply)
Physical
Date Modified: May 12, 2010
Insulation:
Material: High Temperature Thermoplastic
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Terminal Plating:
Underplating: 80 µ" [2.03 µm] Min. Nickel
Wiping Area: 15 µâ or 30 µâ [0.38 â 0.76 µm] Min. Gold
Solder Tail: 100 µâ [2.54 µm] Min. Matte Tin
Electrical
Current Rating: 1.5 A per pin
Insulation Resistance: 103 MΩ at 500 VAC
Withstanding Voltage: 500 VAC for 1 minute
Environmental
Temperature Rating: -40°C to 85°C
Process Temperature Rating: Max. 260°C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
TS-2329-A
Sheet 1 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
|
▷ |