English
Language : 

70035 Datasheet, PDF (1/2 Pages) 3M Electronics – 3M Moisture Barrier Bag Dri-Shield 2000
Pro3duMct D™ata SheMet oisture Barrier Bag Dri-Shield 2000
Product Data Sheet
3M™ Moisture Barrier Bag Dri-Shield 2000
This aluminized moisture barrier bag is designed to provide a static safe environment
for sensitive electronic devices. The bags are heat sealable and suitable for vacuum
packaging. Bags are printed with ESD and moisture warning symbols and a lot code
for traceability.
3M Moisture Barrier Bags Dri-Shield 2000 are manufactured from a laminate of
multiple layers of aluminized polyester and polyethylene. Polyester provides puncture
resistance. Metal layers are intended to provide shielding of Electrostatic Discharge
(ESD) and to help minimize the penetration of electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of ANSI/ESD S541, and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
Compliant* and lead-free**.
3M™ Moisture Barrier Bag
Dri-Shield 2000
Physical
Typical Values
Moisture Vapor Transmission 0.035 grams/100 sq. in./24 hrs.1
Rate (MVTR)
Tensile Strength
7800 PSI, 54 MPa
Puncture Resistance
20 lbs, 89 N
Seal Strength
15 lbs, 66N
Thickness
3.6 mils, .0914 mm +/-15%
Marking Adhesion
Pass
Electrical
Typical Values
ESD Shielding
<10 nJ
Surface Resistance - Interior <1x1011 ohms
Surface Resistance -
Exterior
<1x1011 ohms
Static Decay
< 2 seconds
EMI Attenuation
Cleanliness
Silicone
Heat Sealing Conditions
Temperature
Time
Pressure
45 dB
Typical Values
Not Detected
Typical Values
300°F - 400°F, 140°C - 204°C
0.6 - 4.5 seconds
30 - 70 PSI, 2.05 - 4.8 KPa
1 Standard deviation of 0.008 grams/100 sq. in./24 hrs.
Testing Method
MIL-STD-3010C Method 3030
ASTM D882
MIL-STD-3010C Method 2065
ASTM D882
MIL-STD-3010C Method 1003
IPC-TM-650 2.4.1
Testing Method
ANSI/ESD STM11.31
ANSI/ESD STM11.11
ANSI/ESD STM11.11
ETS 406D Static Decay Meter, 5kV, 1%
Cutoff, 12%RH
1 to 10 GHz
Testing Method
FTIR
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.