5280 Datasheet, PDF (1/2 Pages) 3M Electronics – Model 5515A PLCC Test Adapters Kit

Model 5515A PLCC Test Adapters Kit
Model 5279, 5280, 5733, 5281, 5312, 5401, 5402
FEATURES:
Test adapters are designed for testing surface
mounted PLCC chips with "J" leads (JEDEC MO-
047 and MO-052).
The patented lock-on design attaches directly to the
surface mounted
IC and provides hands-free access to all of the chip
leads.
Gold plated upper contacts assure noise free, low
resistance connections.
Standard .025 square pins accept wire-wrap, .025 sq.
receptacle or soldered wires.
Pins are staggered to use the least space
Gold plated lower contacts assure the best connection
to chip leads.
ORDERING INFORMATION: (single PLCC clip)
Model
Number
No. of Pins
Pins per
Side
Space Required "B"
5279
20
5x5
.675" (17,14mm)
5280
28
7x7
.775" (19,68mm)
5733
32
7x9 .775"x.875" (19,68mm x 22,22mm)
5281
44
11x11
975" (24,77mm)
5312
52
13x13
1.075" (27,31mm)
5401
68
17x17
1.275" (32.39mm)
5402
84
21x21
1.520" (38,60mm)
Board Footprint "A"
0.560" (14,23mm)
0.665" (16,89mm)
.665" x .765" (16,89mm x 19,43mm)
0.865" (21,97mm)
0.965" (24,51mm)
1.180" (29,97mm)
1.350" (34,29mm)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: [phone] Technical Support: 800-241-2060 ([e-mail])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev:100
D1094335, D1094408, D1094409, D1094629
D1094410, D1094370, D1094382, D1094383
Page 1 of 2