5014 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – THM TEST POINTS

Pomona^®
DIP Clips® for 8-14-16-20-24-40 Pin Clips
And 8 Through 40 Pin DIP Removers
Pomona DIP Clip® test clips are designed for
testing dual-in-line IC packages on PC boards. These
devices incorporate many built-in features that assure
a positive electrical connection as well as hands free
testing.
• Contacts (.040" wide on lower end) are serrated
for the best electrical contact.
• .025" X .028" serrated test points on upper end
will accept wire wraps or mini test clips.
• Molded barriers between contacts allows live
board connections without accidental shorting of
contacts.
• Can also be used as an insertion tool for DIPs.
• Contacts are spring tempered Nickel Silver or Gold Plated Beryllium Copper alloy. Oxide penetrating clips have a
roughened stainless steel surface treatment.
• Open back option allows probing on the chip leads while clip is attached.
Pomona's DIP Clip® test clips are perfect for emulation, field service, failure analysis, and for use with logic analyzers.
Size Clip Width Standard Open Back Contact Material and Oxide Penetrating
Pins
DIP Clip® DIP Clip®
Plating
DIP Clip®
8
.43
5108
5208
Be-Cu, Gold Plate
5649
14
.72
5014
5114
Nickel Silver
5650
5214
5314
Be-Cu, Gold Plate
5650
16
.83
3916A
4236A
Nickel Silver
5692
5116
5216
Be-Cu, Gold Plate
5692
20 1.03
5120
5220
Be-Cu, Gold Plate
5693
24 1.22 4124A
4324A
Nickel Silver
5694
5124
5224
Be-Cu, Gold Plate
5694
40 2.02 4140A
4340A
Nickel Silver
5695
5140
5240
Be-Cu, Gold Plate
5695
Static Control
DIP Remover
5016
5016
5016
5016
5016
5016
5024
5024
5040
5040
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
4/16/02
Sales: 909-469-2900 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\Dip_Clips_4386_2_01.doc
PomonaACCESS 90220 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 1 of 2