30058 Datasheet, PDF (1/2 Pages) 3M Electronics – STATIC SHIELDING BAG, OPEN TOP AND ZIPTOP

3M^TM Static Shielding Bag SCC 1000
Open Top
Sizes on Page 2
ZipTop
Static Shielding Bag ~ Metal-In
This transparent, metallized static shield bag helps provide a static safe environment for
sensitive electronic devices. Four layer construction. Polyester dielectric and metal layer
provide Faraday effect shielding of ESD and fields. Tribocharging is minimized by the spe-
cially processed polyethylene. Flat and zipper closure styles. Coded for QC traceability.
These bags are tested to meet or exceed certain electrical and physical requirements of
ANSI/ESD S541, EIA 625, and to be ANSI/ESD S20.20 program compliant.
Specifications
Electrical Properties:
Surface Resistivity / Resistance
Interior
Exterior
Metal
Static Shielding
Static Shielding
Static Decay
Charge Generation
PTFE
Quartz
Physical Properties:
Tensile Strength
Seam Strength
Light Transmission
Heat Sealing Conditions
Temperature
Time
Pressure
Thickness
Silicone or Amine Content
Typical Values
ASTM D257
or
<1012 ohms/square or
<1012 ohms/square or
100 ohms
< 30 volts
< 10 nJ
< 2 seconds
0.09 nC/sq.in.
0.01 nC/sq.in.
4700 PSI
> 10 lbs
40 %
250^oF - 375^o F
0.5 - 3.5 seconds
30 - 70 PSI
3 mils^**
Not detected
** _{tolerance +/-15%}
See 3M Data Sheets for these related items:
Static Warning Labels
Heat Sealer
Test Method^*
ANSI/ESD STM11.11
<1011 ohms
<1011 ohms
EIA 541
ANSI/ESD STM11.31
MIL-STD-3010 4046
Material Structure
SCC 1000 open top and ZipTop static shielding
bags are manufactured from industry approved
Polyester/Metal/Polyethylene laminates. The
polyester dielectric in concert with the metal
layer provide Faraday Effect shielding of an
Electrostatic Discharge (ESD). The metal layer
prevents the penetration of damaging electro-
static fields. Tribocharging is minimized by the
specially processed polyethylene.
STATIC DISSIPATIVE
COATING
POLYESTER
ALUMINUM SHIELD
STATIC
DISSIPATIVE
POLYETHYLENE
Modified Inclined Plane
ASTM D 882
ASTM D 882
Tobias
MIL-STD-3010 1003 +/-20%
FTIR
Important Notice
All statements, technical information, and recommendations related to
3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this prod-
uct, you must evaluate it and determine if it is suitable for your intend-
ed application. You assume all risks and liability associated with such
use. Any statements related to the product which are not contained in
3M’s current publications, or any contrary statements contained on
your purchase order shall have no force or effect unless expressly
agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for one year from the time of purchase. 3M MAKES NO OTHER WAR-
RANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period stat-
ed above, your exclusive remedy shall be, at 3M’s option, to replace or
repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any indi-
rect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.
*This _{product is not on the Qualified Product Listing under the}
Defense Standardization Program.
PRODUCT
DATA
SHEET
SCC 1000 Static Shielding Bag METAL-IN
PRODUCT
STATIC SHIELDING BAG, OPEN TOP AND ZIPTOP
ITEM NUMBER
100(W”)(L”)
DATASHEET
1100-A
98-0799-1068-7
3M Electronic Solutions Division
6801 River Place Blvd
Austin, TX 78726-9000
3M is a trademark of 3M Company.
All other trademarks herein are the property
of their respective owners.
US and Canada: 866-722-3736
Fax: [phone]
Intl: 919-718-0000; Fax: [phone]
email: [e-mail]; www.3Mstatic.com © 3M 2012. All rights reserved.