|
1552 Datasheet, PDF (1/7 Pages) 3M Electronics – Latch/Eject Header - 2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount | |||
|
3M⢠Latch/Eject Header
2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount
1552 Series
⢠14 pin counts ranging from 6 to 50 positions
⢠Latch/eject mechanism maintains a secure
connection
⢠Roll pins retain latches to body in shipping and high
vibration environments
⢠Ejector helps make removal of assemblies easy
⢠Latch design helps resist breakage during eject
⢠High temperature insulators suitable for âlead freeâ
processing and meet JEDEC J-STD-020C
⢠Robust system solution when used with 3M⢠IDC
Wiremount Sockets or 3M⢠Molded Cable
Assemblies
⢠SMT latch/eject headers are available in tape and reel
with vacuum cap for automatic placement. Latch
option 2 and 3.
⢠See Regulatory Information Appendix (RIA) for
chemical compliance information
Physical
Date Modified: September 16, 2008
Insulation:
Material: Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Black
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ" [ 1.27 μm ] Nickel
Wiping Area: See Ordering Information
Solder Tails: 200 μ" [ 5.0 μm ] Matte Tin
Electrical
Current Rating: 1A
Insulation Resistance: > 1 à 109 Ω at 500 VDC
Withstanding Voltage: 1,000 VRMS at Sea Level
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: Maximum 260°C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
TS-2199-F
Sheet 1 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
|
▷ |