14H26-SZ3M-050-0LC Datasheet, PDF (1/6 Pages) 3M Electronics – 3M Mini D Ribbon (MDR) Cable Assembly

3M^™ Mini D Ribbon (MDR) Cable Assembly
.050” High Speed Digital CameraLink^™ Cable – Right Angle
14H26-SZ3X-XXX-0LC
• Supports Industrial CameraLink^™ standard for camera to
frame grabber communications
• Space-saving right angle cable exit
• 11 shielded twin-ax pairs and four drain wires
• Entire cable bundle is shielded with foil and braid for
additional signal protection
• Rugged MDR ribbon type contact
• Rugged thumbscrew retention
• EMI shielded junction shell on straight end
• EMI shielded overmolded shell on right-angle end
• See Regulatory Information Appendix (RIA) for chemical
compliance information
Date Modified: January 24, 2008

Physical
Connector Contact Plating
Wiping Area: 30 µ ” [0.76 µm] Min. Gold (RIA E1 & C1 apply)
Overmolded Shell:
Color: Black
Material: Polyvinyl Chloride (PVC)
Shell:
Color: _Beige
Material: Polyester Elastomer
Cable:
Color: Beige
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Electrical
Voltage Rating: 30V
Current Rating: 1 A
Insulation Resistance: > 1 x 10⁸ Ω at 100 V_DC
Withstanding Voltage: 350 V_RMS for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance: 100 ± 10 Ω
Conductor Size: 28 AWG Stranded
Propagation Velocity: 1.25 ns/ft [4.1 ns/m ]
Skew (within pair): 50 ps/meter maximum
Skew (channel skew per chipset): 50 ps/meter maximum
Environmental
Temperature Rating: -20 °C to +75 °C
UL File No.: E86982
TS-2262-A
Sheet 1 of 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373