14H26-SZ3M-050-03C Datasheet, PDF (1/6 Pages) 3M Electronics – 3M Mini D Ribbon (MDR) Cable Assembly

3M^™ Mini D Ribbon (MDR) Cable Assembly
.050” Right-Angle Digital Camera Cable – 26 position
14H26-SZ3X-XXX-03C
• Mates to popular 3M MDR 26 position receptacle
• For machine vision camera to frame grabber
communications in applications where full CameraLink^™
configuration is not necessary
• 3 shielded quads with drains and 5 unshielded twisted pairs
• Entire cable bundle shielded with foil and braid for
additional signal protection
• Rugged MDR ribbon type contact for reliable, repeatable
connectivity
• Rugged thumbscrew retention
• EMI shielded junction shell
• See Regulatory Information Appendix (RIA) for chemical
compliance information
Date Modified: January 16, 2008
Physical
Connector Contact Plating:
Wiping Area: 30 μ” [0.76 μ m] Min. Gold (RIA E1 & C1 apply)
Overmolded Shell:
Color: Black
Material: Polyvinyl Chloride (PVC)
Shell:
Color: Gray
Material: Polyester Elastomer
Cable:
Color: Gray
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
TS-2258-A
Sheet 1 of 3
Electrical
Voltage Rating: 30V
Current Rating: 1 A
Insulation Resistance: > 1 x 10⁸ 7 at 100 V_DC
Withstanding Voltage: 350 V_RMS for 1 minute
Individually Shielded Twisted Pairs:
Characteristic Impedance: 100 ± 10 7
Conductor Size: 28 AWG Stranded
Skew (within pair): 50 ps/meter maximum
Skew (Channel skew per chipset): 100 ps/meter maximum
Environmental
Temperature Rating: -20 °C to +75 °C
UL File No.: E86982

Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373