14526-EZ5B-050-02C Datasheet, PDF (1/4 Pages) 3M Electronics – 3M Mini D Ribbon (MDR) Cable Assembly

3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 26 to 26 Position 14526-EZ5B-XXX-02C
• Eight shielded differential pairs
• Each differential twin-ax pair has a foil shield
and drain wire
• Entire cable bundle is shielded with foil and
braid for additional signal protection
• Rugged MDR Ribbon type contact
• Quick release latches
• RoHS* compliant
Date Modified: October 19, 2005
TS-0866-08
Sheet 1 of 3
Physical
Connector Contact Plating
Wiping Area: 30 µ″ [ 0.76 µm ] Min. Gold
Shell
Color: Parchment/Beige
Material: Acrylonitrile Butadiene Styrene (ABS)
Cable
Color: Parchment/Beige
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Electrical
Voltage Rating: 30 V
Current Rating: 1 A
Insulation Resistance: _{> 1 × 10}⁸_{Ω at 100 VDC}
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance: 100 ± 10Ω
Conductor Size: 30 AWG Stranded
Propogation Velocity: 1.25 ns/ft [4.1 ns/m ]
Environmental
Temperature Rating: -20°C to +75°C
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
UL File No.: E86982
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373