10268-5JBEPC Datasheet, PDF (1/4 Pages) 3M Electronics – 3M Mini D Ribbon (MDR) Connectors

3M^™ Mini D Ribbon (MDR) Connectors
.050” Boardmount Through-Hole Right Angle Receptacle - Shielded, SCSI-2 Layout 102 Series
• Wiper-on-wiper contact for reliable repetitive
plugging
• Rugged die cast metal case construction
• Ground lock for reliable PCB retention
• Interface latch design for connection stability
• 68 position
• Reverse pin layout pattern - SCSI-2 layout
compatible
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3mconnectors.com for compliance information
(RIA E1 & C1 apply)
Date Modified: July 21, 2009

Physical
Insulation Material: Glass Reinforced Polyester (PBT)
Insulation Flammability: UL 94V-0
Insulation Color: Black
Contact Material: Copper Alloy
Plating:
Underplating: 80 μ” [ 2.03 μm ] Nickel
Wiping Area: _{30 μ” [ 0.76 μm ] Min. Gold over Nickel}
Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply)
Body Material: Zinc Alloy
Body Plating: Nickel
Ground Lock Material: Copper Alloy
Plating: Matte Tin
Shroud and Latch Hook Material: Steel
Shroud and Latch Hook Plating: Nickel
Marking: 3M Logo and Part Number
TS-2216-C
Sheet 1 of 3
Electrical
Current Rating: 1 A
Insulation Resistance: > 5 × 10⁸Ω at 500 V_DC
Withstanding Voltage: 500 V_RMS for 1 Minute
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: Solder Dip Test - 260°C for 10 sec, 2 times after 100°C max. preheat, 60 sec
max. duration
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373