10226-1A10-PE Datasheet, PDF (1/6 Pages) 3M Electronics – 3M™ Mini D Ribbon (MDR) Connectors

3M™ Mini D Ribbon (MDR) Connectors
.050″ Surface Mount Right Angle Receptacle - Shielded
102 Series
• Wiper-on-wiper contact for reliable
repetitive plugging
• Ultra-low signal skew for high data
rate transmission
• Interface latch design for connection stability
• MDR digital LCD interface
• Contacts: 26
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: November 13, 2007
TS-0874-B
Sheet 1 of 3
Physical
Insulation Material: Glass Reinforced Polyester (PCT)
Flammability: UL 94V-0
Color: Beige
Contact Material: Copper Alloy
Underplating: 80 μ" [2.0 μm] Min. Nickel
Wiping Area Plating: 20 μ" [0.50μm] Min. Gold
Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply)
Shroud & Latch Hook Material: Steel
Plating: Nickel
Grounding Flange (Screw Lock) Material: Copper Alloy
Plating: Tin
Marking: 3M Logo & Part Number
Electrical
Current Rating: 1 A
Insulation Resistance: > 5 × 10⁸Ω at 500 V_DC
Withstanding Voltage: 500 V_RMS for 1 Minute
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: 240°C peak temperature for less than 10 secs. after 180°C max. preheat for 90 secs.
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373