1021455G3PL Datasheet, PDF (1/6 Pages) 3M Electronics – 3M Mini D Ribbon (MDR) Connectors

3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Receptacle - Shielded
102 Series
• Wiper-on-wiper contact for reliable repetitive
plugging
• Surface mount compatible PCT insulator
material
• Ground lock PCB retention
• Interface latch design for connection stability
• MDR digital LCD interface as a 20 or 26
contact connector
• Contacts: 14, 20, 26, 36, 40, 50 and 68
• See Regulatory Information Appendix (RIA)
for chemical compliance information.
Date Modified: November 15, 2007
Physical
Insulation Material: Glass Reinforced Polyester (PCT)
Flammability: UL 94V-0
Color: See ordering information
Contact Material: Copper Alloy
Plating
Underplating: See ordering information
Wiping Area: See ordering information
Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply)
Shroud and Latch Hook
Material: Steel
Plating: Nickel
Ground Lock Material: Copper Alloy
Plating: Tin in combination with gold flash plated tail
Marking: 3M Logo and Part Number
Electrical
Current Rating: 1 A
Insulation Resistance: _{> 5 × 10}⁸_{Ω at 500 VDC}
Withstanding Voltage: 500 V_RMS for 1 Minute
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: 260°C (profile per J-STD-020C)
TS-0621-C
Sheet 1 of 3
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373