10120-5212PC Datasheet, PDF (1/7 Pages) 3M Electronics – 3M Mini D Ribbon (MDR) Connectors

3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Plug - Shielded
101 Series
• Wiper-on-wiper contact for reliable
repetitive plugging
• Rugged die cast metal case construction
• Screw or ground lock PCB retention
• Normal and reverse “D” interface options for
board to board flexibility
• IEEE 1284C Interface as a 36 contact connector
• Contacts: 20, 26, 36 and 50
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: November 26, 2007
TS-0620-B
Sheet 1 of 4
Physical
Insulation Material: Glass Reinforced Polyester Body
Flammability: UL 94V-0
Color: Black
Contact Material: Copper Alloy
Plating
Underplating: 80 μ″ [ 2.0 μm ] Min. Nickel
Wiping Area: 30 μ″ [ 0.76 μm ] Min. Gold
Solder Tail Plating: Gold flash over Nickel (RIA E1 & C1 apply)
Body Material: Zinc Alloy
Plating Nickel
Ground Lock
Material: Copper Alloy
Plating: Tin in combination with Gold flash plated tail
Marking: 3M Logo and Part Number
Electrical
Current Rating: 1 A
Insulation Resistance: _{> 5 × 10}⁸_{Ω at 500 VDC}
Withstanding Voltage: 500 V_RMS for 1 Minute
Environmental
Temperature Rating: -20°C to +85°C
Process Rating: Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat,
60 sec. max. duration
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373