10114-6000EC Datasheet, PDF (1/5 Pages) 3M Electronics – 3M Mini D Ribbon (MDR) Connectors

3M™ Mini D Ribbon (MDR) Connectors
.050″ IDC Wiremount Plug - Shielded
101 Series
• Wiper-on-wiper contact for reliable repetitive
plugging
• MDR digital LCD interface as a 20 or 26
contact connector
• IEEE 1284C Interface as a 36 contact
connector
• Accepts a wide variety of cable constructions
including flat, round, twisted pair and twinax
cables
• Accepts a wide variety of shielded junction
shells
• Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: February 7, 2007
TS-0423-14
Sheet 1 of 3
Physical
Insulation Material: Glass Reinforced Polyester
Flammability: UL 94V-0
Body Color: Black
Cover Color: Black, Gray
Contact
Material: Beryllium Copper
Underplating: 80 μ″ [ 2.0 μm ] Nickel
Wiping Area Plating: 30 μ″ [ 0.76 μm ] Min. Gold
IDC Contacts Plating: Gold flash
Shroud
Material: Steel
Plating: Nickel
Wire Accommodation
Black Cover: 28 AWG Stranded, 30 AWG Solid (Insulation Diameter = 0.7 mm Max.)
Gray Cover: 26 AWG Solid (Insulation Diameter = 0.7 mm to 0.9 mm)
Marking: 3M Logo and Part Number
Electrical
Current Rating: 1 A
Insulation Resistance: _{> 1 × 10}⁸_{Ω at 500 VDC}
Withstanding Voltage: 500 V_RMS for 1 Minute
Environmental
Temperature Rating: -20°C to +85°C
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373